Model T

|
Show 36 Of 48
Showing 36 Of 48 results
Part # T-13007-LED | Model Year 09-31

Adjustable LED headlamp bulb.  This bulb works on 6, 8, and 12 volt applications and will work on positive or negative ground. Bulb give you a true high and low beam pattern with a bright white light. Only draw 1.3 amps on low or high beam. Bulb can be rotated for different pin orientations on headlamp sockets. 

Our standard A-13007-LEDX bulbs can't be used on a model T due to the pin orientation in the socket which positions the beam up and down instead of side to side.  Since this bulb has an adjustable base, it will give the correct light pattern on any vehicle!

Any warranty claims must be handled directly with manufacturer per instructions included with product.

DISCONTINUED
Temporarily
OUT OF STOCK
$49.95 EA
Part # A-13466-12LED | Model Year 19-31
LED version of our A-13466-12 which is a 12 volt parking bulb. Also used in the dash lamp and dome lamp. Works on negative ground systems only. Candle Power is very similar to the normal bulbs. The benefit of these LED's is much less draw/amperage used.
DISCONTINUED
Temporarily
OUT OF STOCK
$5.00 EA
Part # A-13465-LED | Model Year 19-31

LED stop lamp bulb that will work in both 6 & 12 volt applications as well as negative and positive ground applications. Bulb has 6 forward facing led's and 7 sideways led's. Direct replacement for the A-13465 and A-13465-12 bulbs. 23 candle power in comparison to a regular bulb being 21 candle power so not really much brighter but only uses about 1/8 of a watt to power.

Bulb is 1-1/2" tall and 25/32" wide at the widest point.

DISCONTINUED
Temporarily
OUT OF STOCK
$6.00 EA
Part # LT-45 | Model Year 09-31
License plate topper steel 4-3/4" overall height, 3-1/2" diameter circle.
DISCONTINUED
Temporarily
OUT OF STOCK
$24.95 EA
Part # LT-44 | Model Year 09-31
License plate topper steel 4-3/4" overall height, 3-1/2" diameter circle.
DISCONTINUED
Temporarily
OUT OF STOCK
$24.95 EA
Part # LT-42 | Model Year 09-31
License plate topper steel 4-3/4" overall height, 3-1/2" diameter circle.
DISCONTINUED
Temporarily
OUT OF STOCK
$24.95 EA
Part # LT-43 | Model Year 09-31
DISCONTINUED
Temporarily
OUT OF STOCK
$24.95 EA
Part # T-3252 | Model Year 15-27
A set of 16 insulators required when rebuilding the magneto coil. These insulators go between the insulated copper windings and the steel plate. Used on all single stack coils and double oval magneto coils. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$14.95 SET
Part # T-3115 | Model Year 09-27

If the rear motor mounts of your Model T are broken or missing, this bracket will get you back on the road! You'll need to cut/grind off most of the old motor mount in order to install this. The edge of the bracket with the 2 mounting ears in it sits under the oil pan and is held in place with 2 longer bolts and spacers that are included in the kit. The upper portion of the bracket will attach to the side and top of the frame just like the original mount. Use your existing bolt for the very top mounting hole. Sold individually. U.S.A.

DISCONTINUED
Temporarily
OUT OF STOCK
$49.00 EA