Part #
A-9630
|
Model Year
28-31
Used on the throttle shaft of the Tillotson carburetors. U.S.A.
Part #
A-9549-MBX
|
Model Year
28-31
Set of 4 screws and lock washers for securing the choke and throttle plates to the shafts on Tillotson carburetors. U.S.A.
Part #
A-9558-XF
|
Model Year
28-31
Float hinge pin used on the Tillotson carburetors. U.S.A.
Part #
A-9564-XF
|
Model Year
28-31
Float valve (needle/seat) for the Tillotson pot metal carburetors. Gasket included. U.S.A.
Part #
A-9577-XF
|
Model Year
28-31
Tillotson idle adjusting needle. Needle only, does not include the spring. USA
Part #
A-6026
|
Model Year
28-31
Simply unscrew the timing pin from the front of the engine and screw in the Ford- A-Time tool until it starts to beep then turn it in a 1/4 of a turn. Using your hand crank turn the engine slowly until the Ford-A-Time tool stops beeping if you pass the dimple rock the car back until the beeping stops. Remove the Ford-A-Time tool and screw the timing pin back in place before starting the engine. U.S.A.
Part #
A-37330
|
Model Year
30-31
Top saddle for the 1930-31 Deluxe Phaeton (180-A) These are cast stainless steel and will need polishing. Originally these were chrome plated. Sold in pairs, set screw included. USA
Part #
B-7153
|
Model Year
32-48
Transmission gasket set for the 1932-48 transmission. Does not work on 1937-39 V8-60 transmissions. Kit includes front and rear bearing retainer gaskets, universal joint housing gaskets and cork strip, universal joint housing cap, and the top cover gaskets (2-different styles) U.S.A.