Model A

|
Show 63 Of 66
Showing 63 Of 66 results
Part # A-9549-MBX | Model Year 28-31
Set of 4 screws and lock washers for securing the choke and throttle plates to the shafts on Tillotson carburetors. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$1.25 SET
Part # A-9558-XF | Model Year 28-31

Float hinge pin used on the Tillotson carburetors. U.S.A.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$1.25 EA
Part # A-9564-XF | Model Year 28-31
Float valve (needle/seat) for the Tillotson pot metal carburetors. Gasket included. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$12.75 EA
Part # A-9577-XF | Model Year 28-31
Tillotson idle adjusting needle.  Needle only, does not include the spring.  USA
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$5.25 EA
Part # A-9534-XF | Model Year 28-31
Tillotson main jet set. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$16.50 SET
Part # A-6026 | Model Year 28-31
Simply unscrew the timing pin from the front of the engine and screw in the Ford- A-Time tool until it starts to beep then turn it in a 1/4 of a turn. Using your hand crank turn the engine slowly until the Ford-A-Time tool stops beeping if you pass the dimple rock the car back until the beeping stops. Remove the Ford-A-Time tool and screw the timing pin back in place before starting the engine. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$38.95 EA
Part # A-37330 | Model Year 30-31

Top saddle for the 1930-31 Deluxe Phaeton (180-A) These are cast stainless steel and will need polishing. Originally these were chrome plated. Sold in individually, set screw included. U.S.A.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$175.00 PR
Part # B-7153 | Model Year 32-48
Transmission gasket set for the 1932-48 transmission. Does not work on 1937-39 V8-60 transmissions. Kit includes front and rear bearing retainer gaskets, universal joint housing gaskets and cork strip, universal joint housing cap, and the top cover gaskets (2-different styles) U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$14.95 SET
Part # A-1180 Model Year 28-38
Part # A-7005 Model Year 28-31
Part # A-7017-B Model Year 28-31
Part # A-7025 Model Year 28-48
Part # A-7040 Model Year 28-48
Part # A-7045-B Model Year 28-31
Part # A-7060 Model Year 28-31
Part # A-7061 Model Year 28-31
Part # A-7063 Model Year 28-34
Part # A-7065 Model Year 28-48
Part # A-7070 Model Year 28-31
Part # A-7080-B Model Year 30-31
Part # A-7100 Model Year 28-31
Part # A-7101 Model Year 28-31
Part # A-7111 Model Year 28-31
Part # A-7113 Model Year 28-31
Part # A-7115 Model Year 28-31
Part # A-7118 Model Year 28-48
Part # A-7121 Model Year 28-48
Part # A-7140 Model Year 28-31
Part # A-7141 Model Year 28-31
Part # A-7153 Model Year 28-31
Transmission rebuild kit contains: A-1180 snap ring, 2x A-7005 filler/drain plugs, A-7017-B main drive gear, A-7025 & A-7065 bearings, A-7040 baffle, A-7045-B snap ring, A-7060 main shaft, A-7061 collar, A-7063 spacer, A-7070 snap ring, A-7100 low/reverse gear, A-7101 2nd & high gear, A-7111 cluster gear shaft, A-7113 cluster gear, A-7115 spacer, 2x A-7118 roller bearings, A-7121 roller bearing, A-7140 reverse idler shaft, A-7141 reverse idler gear, A-7153 gasket set, A-7080-B baffle
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$849.95 KIT