Wire Wheels

|
Show 9 Of 10
10 Results
Part # T-2884/90 | Model Year 26-28
A set of 22 standard nuts and one locking style nut. Fits 1926-27 Model T's and 1928 Model A's.
DISCONTINUED
Temporarily
OUT OF STOCK
$159.95 SET
Part # T-2886 | Model Year 26-27
Presses into the front hub of the 1926-27 T's with wire wheels. keeps dust and dirt out of your bearings. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$19.95 EA
Part # T-2803-X | Model Year 09-27
Mounts to the rear leaf spring U-bolts. Includes adapter for attaching Dayton wire wheels. Can be used on all Coupes, Roadsters and Speedsters. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$325.00 EA
Part # A-1025-AR | Model Year 28-29
These flaps fit both the 21" Wood and Wire Wheels. They are thick bands that protect the inner tube from the wheel. With Model T wood wheels THESE ARE AN ABSOLUTE MUST, without these you can almost guarantee yourself a flat! If your 21" Model A rims are extremely pitted or rough, we recommend using these flaps instead of the rim liners. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$29.50 EA
Part # A-1506-21M | Model Year 28-29

Metal stem tubes are what was on the Model A and Model T's when it rolled off of the assembly line. Stems are nickel plated but are NOT imprinted like our authentic style clamp-in style valve stems.

When you use a metal stem tube, you'll also need to order lock nuts, bridge washers, dust covers, and rim washers.

21" tube with the #127 style stem. This tube was originally used on 1928-29 Model A's and 1926-27 Model T's with wire wheels.

DISCONTINUED
Temporarily
OUT OF STOCK
$29.95 EA
Part # A-1506-20-440 | Model Year 19-31
Used on the 1919-27 TT truck rear wheels and the 1928-31 AA truck wheels. The #440 stem is centered but has a right angle bend in the stem after it comes through the rim. 
DISCONTINUED
Temporarily
OUT OF STOCK
$42.00 EA
Part # T-1506-35-W | Model Year 09-27
30 X 3 1/2 (23') Metal stem tube with the #127 stem. This tube with the #127 stem was used on wire wheels. Hardware for metal stem tubes must be purchased separately.
DISCONTINUED
Temporarily
OUT OF STOCK
$51.95 EA
Part # A-1013 | Model Year 26-31
Lifting and aligning your wheel with the wheel studs can often difficult, especially as we get older! Simply thread the 2 wheel buddy alignment pins over 2 wheel studs, align the wheel with the pins and slide into position! Ends of pins are slotted for a large screwdriver. Fits 1926-27 Model T's with wire wheels 1928-31 Model A's, as well as Early V-8's.
DISCONTINUED
Temporarily
OUT OF STOCK
$43.00 PR
Part # T-2881 | Model Year 26-27
"New reproduction of the original style 21"" wheels for the 1926-27 Model T. Wheels come in primer. Excellent quality!"
DISCONTINUED
Temporarily
OUT OF STOCK
$460.00 EA