Water Pump

|
Show 8 Of 8
8 Results
Part # A-8524 | Model Year 09-31
A 12" long piece of graphite impregnated ePTFF composite packing. Cut individual rings and stagger the joints. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$3.25 EA
Part # T-3919-160 | Model Year 09-27
A thermostat will get your motor to the proper running temperature much quicker. Mounts between water outlet and head. This is the 160 degree version to use if you're not running a water pump. 1909-27 U.S.A
DISCONTINUED
Temporarily
OUT OF STOCK
$8.50 EA
Part # T-3919-180 | Model Year 09-27
A thermostat will get your motor to the proper running temperature much quicker. Mounts between water outlet and head. This is the 180 degree version that is meant to be used with a water pump. 1909-27  U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$8.50 EA
Part # T-3900-WP | Model Year 09-27
Does old Lizzie act like Old Faithful? Then you need a water pump. It's almost a necessity for parades in July. This is a very good tested and proven style of pump that has been around for years! Painted black. Don't forget to order the correct size fan belt, add 4" to your current belt size if you are installing a water pump.
DISCONTINUED
Temporarily
OUT OF STOCK
$179.95 EA
Part # A-8500 | Model Year 09-31
This is a modern multi-purpose, hi-temp, water proof grease to be used on the water pump. Also can be used to grease the chassis. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$9.25 EA
Part # T-3944-WP2 | Model Year 09-27
Black flexible hose used with the T-3902-WP leakless style water pump. Runs from the lower outlet on the radiator to the water pump. When buying a new T-3902-WP water pump, this hose is included. Mexico
DISCONTINUED
Temporarily
OUT OF STOCK
$13.50 EA
Part # T-3902-WP | Model Year 09-27
An excellent quality leakless water pump that is guaranteed not to leak. Comes with a mounting gasket, and black flex hose. The only drawback with this pump is the black flex hose gives a bit of a modern appearance. Don't forget to order the correct fan belt, 1909-16 needs a 28" belt, 1917-19 needs 31", 1920-25 needs a 32" belt and 1926-27 uses a 34" belt. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$271.00 EA
Part # T-3910 | Model Year 09-27
If you have an old pump with a 1/2" shaft, this pulley will work for you. Ribbed on the edges to keep the belt from slipping off. Held on with an allen headed set screw. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$11.95 EA