Part #
A-37106-T
|
Model Year
09-31
A handy inexpensive tool for fastening snap style fasteners in material.
Part #
T-3858-A
|
Model Year
23-27
For the later cars and for use with the saddle bracket with 1/2" hole. U.S.A.
Part #
A-37105-F
Model Year
09-31
Female eyelet for the A-37104 style fasteners. You'll need the A-37105-T tool to crimp these fasteners to the fabric. Nickel finish.
Part #
A-37104-SGL
Model Year
28-31
Part #
A-37104-TPL
Model Year
28-31
Commonly used on the back of the body to attach the top. Size indicated is from top of hex to the retaining finger. U.S.A.
Part #
T-24563
|
Model Year
17-22
Theses clips slide around the pivot point of the top irons where they attach to the body. The two legs of this clip slide into the cross drilled hole in the top iron mounting stud and hold the top iron on. Stainless steel so they can be left bare or painted black to be authentic. Roadsters use 2 Touring use 4.
Part #
T-3589
Model Year
09-27
Part #
T-3589-T
Model Year
09-31
Part #
T-3589-R
Model Year
23-31
Part #
RA-1017
Model Year
09-31
These rivets are used to secure the wooden top bows to the top irons. Solid rivets were used on earlier vehicles, tubular on later. Setting tool for solid rivets must be used with a standard air hammer, tool for setting tubular rivets is a hand tool. U.S.A.
Part #
T-24562-F
|
Model Year
13-17
Black leather strap with brass cotter pin. Attaches to top iron and cotter pin holds top iron to the body. 1913-17. U.S.A.
Part #
T-3924-BS
Model Year
09-11
Part #
T-3924-AS
Model Year
09-11
Cast bronze brackets that attach to radiator stud. Early T's had a long leather strap that ran from the top down to these loops to hold top up. Twisted style pictured. 1909-11. U.S.A.
Part #
T-3827-X
|
Model Year
15-22
These loops attach to the windshield hinge and provide a hole for the top strap hook to hook onto. U.S.A.