Top Parts

|
Show 36 Of 76
Showing 36 Of 76 results
Part # T-45226 Model Year 09-31
Part # T-45226-SS Model Year 09-27
This is the end cap that finishes up the end of the Hide'm welt A-47305 ends Very nice repo made exact as original. Available in plain steel or stainless steel. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-37103-SGL Model Year 28-31
Part # A-37103-DBL Model Year 28-31
Part # A-37103-WS Model Year 09-31
Studs are normally mounted on windshield stanchions to hold the side curtains on. 10/32 threads. The measurement given is overall length less the threads. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # T-7980-SGL Model Year 09-27
Part # T-7980-DBL Model Year 09-27
Part # T-7980-SGLB Model Year 09-27
Part # T-7980-DBLB Model Year 09-27
Commonly used on Model T tops and side curtains. The single is used to attach only one of the female fasteners and the double is for two layers of the female fasteners. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-37105 Model Year 28-31
Part # A-37105-X Model Year 26-31

This is the male stud that is attached to the side curtains which locks into the A-37101 body sockets. A-37105 is the original style, A-37101-T Body Socket Tool is required for installing them. U.S.A.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # T-7980-M9 | Model Year 09-27
Authentic cast double male murphy fastener. This style has a curved base commonly used on moldings, windshield frames, or top irons.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$16.75 EA
Part # T-7979-MA Model Year 09-10
Part # T-7979-MB Model Year 09-10
Used with our T-7979-F. You can nail shank down to use as a rivet for attaching to the buggy rail on early T's. These are also nailed into the rear bow to hold the T-7831-RL roll up curtain straps in place.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # T-7980-PB Model Year 09-16
Part # T-7980-PN Model Year 09-27
Used in areas that require the male fastener to be attached to material. Backing plate included with each fastener. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-37106-MS | Model Year 09-31
Male part of the snap fastener. A-37106-MST holds this to the material. Nickle You'll need the A-37106-T tool to assemble. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$0.15 EA
Part # A-37106-MST | Model Year 09-31
Backer with a tubular rivet style stud used to attach the A-37106-MS male snap on to fabric. You'll need the A-37106-T tool to assemble. Nickle. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$0.30 EA