Part #
T-3058-ER
|
Model Year
09-27
467" reamer needed when going from a .452 diameter oversize tappet to a .030" oversize tappet. Reams the tappet guide in the block. U.S.A.
Part #
T-2819-P
|
Model Year
09-27
This puller is for 1909-27 T's with wood wheels. Will not work on T's with wire wheels or TT (1-ton) trucks. Solid steel, not cast. U.S.A.
Part #
T-2819-PT
|
Model Year
19-27
No more ruined axles with this tool! Threads on rear hub cap threads and a bolt threads down against the end of the axle shaft and keeps outward pressure on the hub while you tap the end of this tool. This puller is only used on the 1919-27 TT (1-ton) trucks. U.S.A.
Part #
T-3536
|
Model Year
09-27
Correct adjustment of the carburetor and timer are achieved by bending the control rods. These handy tools make it easy to bend the rods. 3 piece set. U.S.A.
Part #
A-5303-D
|
Model Year
09-31
An alternative to an expensive reamer. Drills your shackle bushings to proper bore. 1/2" shank.
Part #
T-3820-T
|
Model Year
09-31
This bushing driver is used for removing and installing the front shackle bushings. U.S.A
Part #
T-3844-T
|
Model Year
09-31
This bushing driver is used for removing and installing the rear shackle bushings. U.S.A
Part #
A-5303-R
|
Model Year
09-31
Not a cheap adjustable reamer, this is an American made hand reamer for the job. Reams front and rear shackle bushings in T's or A's. U.S.A.
Part #
A-37105-T
|
Model Year
26-31
This tool is needed to install the A-37105 and A-37105-F/FD fasteners. U.S.A.