Part #
T-3504
|
Model Year
09-14
A polished brass cover for the early brass era cars.
Part #
T-3518
|
Model Year
09-27
The pins on which the steering pinion gears pivot. Three are required, 1926-27 uses 2 short and 1 long pin all other years use the three short pins. U.S.A.
Part #
T-3517-AS
Model Year
09-24
Part #
T-3517-BS
Model Year
26-27
Part #
T-3517-ASO
Model Year
09-25
Part #
T-3517-BSO
Model Year
26-27
Each set contains the drive pinion assembly and the 3 pinion gears. We offer these in an original size version and an oversize version. The drive pinion on the original is made to the Ford specs. The oversize kit has a larger diameter on the drive pinion where it passes through the gear cover. This way, you ream your gear cover for a perfect fit. The pinion gears in both kits are bored for the new T-3518 pins which are slightly larger than originals. U.S.A.
Pinion gears on early version have 12 teeth, the later 26-7 version has 13 teeth.
Driving pinion on early version has 12 teeth, the later 26-7 version has 9 teeth.
Part #
T-3501-W2
|
Model Year
20-25
Round maple wood rims, original contour, unfinished. 1920-25 is for the 16" stamped steel spider, U.S.A.
Part #
T-3501-W3
|
Model Year
26-27
Round maple wood rims, original contour, unfinished. 1925-27 is for the stamped steel spider. U.S.A.
17" O.D, 14-5/8" I.D.
Part #
T-3502
Model Year
09-27
Part #
T-3502-S
Model Year
09-27
Part #
T-3502-SF
Model Year
19-27
Authentic style screws for attaching the steering wheel rim to the spider. Sold in sets of 4. U.S.A.
Part #
T-3516
|
Model Year
12-27
Finally, 5:1 ratio steering for all years! Kit comes complete with a new steering shaft, pins, and a gear set. Makes steering the T really effortless! U.S.A.
Part #
T-3523
|
Model Year
09-27
Holds the steering arm onto the bottom end of the steering shaft.
Part #
T-3520
|
Model Year
09-27
Used to mount the steering wheel to the steering column. U.S.A.