Part #
T-3515-CL
Model Year
23-25
Part #
T-3515
Model Year
23-25
Made of steel as original. Supports the steering column at the dash panel. Fits 1923-25 T's. We offer the complete bracket with the clamp or the clamp individually.
Part #
T-3515-MB
|
Model Year
23-25
Set of screws and square nuts used to mount the steering column clamping bracket to the dash. Fits 1923-25 Roadster, Touring and C-Cab Trucks.
Part #
T-3503-B
Model Year
09-27
Part #
T-3503-C
Model Year
09-27
Simply remove your steering wheel, attach this bracket where you just removed the steering wheel, and then attach your steering wheel to this bracket. There is a pin that you pull that releases the steering wheel and allows it to pivot vertically so getting in and out of the car is easier! U.S.A.
Part #
T-3544
|
Model Year
09-27
Goes around the steering column at the frame bracket. Keeps the grease in. U.S.A.
Part #
T-3501-C1
Model Year
11-19
Part #
T-3501-X1
Model Year
11-19
Round cherry or walnut wood rims, original contour. Stained and finished with two coats of varnish.
1913-19 uses 15 " cast spider. U.S.A.
Part #
T-3501-C2
Model Year
19-25
Part #
T-3501-X2
Model Year
19-25
Round cherry or walnut wood rims, original contour. Stained and finished with two coats.
1919-25 uses stamped steel spider. U.S.A.
Part #
T-3501-C3
Model Year
25-27
Part #
T-3501-X3
Model Year
25-27
Round cherry or walnut wood rims, original contour. Stained and finished with two coats.
Late 1925-27 uses stamped steel spider. U.S.A.
Part #
T-3547
|
Model Year
09-27
Change that worn out pitman arm! The arm is forged, ball is fully machined and heat treated.
Part #
T-3548
|
Model Year
09-27
Key for the end of the steering column where the steering arm attaches. U.S.A.