Part #
T-5131-A
|
Model Year
19-27
Used on generators and starters. Generators use 2, starters use 4. U.S.A.
Part #
T-3266
|
Model Year
09-27
- For use in generator, use six screws to hold the end plate to the generator housing at the gear end.
- For use in starter, use six of these screws to hold the end plate to the round starter housing at the drive end.
- For use in the magneto, use three of these screws on the 1909-25 T's to mount the magneto post to the top of the hog's head. U.S.A.
Part #
A-11086
|
Model Year
19-31
This screw usually takes a beating getting it out. It is the screw that goes through the generator casting, and secures the heavy steel plates that hold the fields in place. Also used on Model T generators and starters. U.S.A.
Part #
T-5108-RB
|
Model Year
19-27
Starter brush plate is taken apart and rebuilt with new insulators. These units are sold on exchange only and we MUST have your core on hand before we can send you a rebuilt unit. Core must have all brush holders and springs intact. U.S.A.
Part #
T-5099
|
Model Year
19-27
Available on exchange only. We must have a rebuildable starter before we can ship out a rebuilt unit. Remove starter drive and cover band before sending. STARTER DRIVES AND COVER BANDS LEFT ON CORES WILL NOT BE RETURNED. This s a complete rebuild. U.S.A.
Part #
T-5108
|
Model Year
19-27
Set of 4 insulators that insulate the brush holders at the brush plate. U.S.A.
Part #
T-5104
|
Model Year
19-27
A four piece set of the brushes needed for the Model T starter motor. U.S.A.
Part #
T-5115
|
Model Year
Holds tension on the starter brushes. 4 required, U.S.A.