Springs Leaf Front & Rear
Show 27 Of 33
Showing 27 Of 33 results
Part # T-3848-X | Model Year 13-15
Square headed bolts with thin hex nuts. Used for securing the spring clamps to the rear leaf spring. Sold in a set, 1 set per car. Black oxide. 1/4-20 x 2-1/2
Part # T-3843 | Model Year 19-25
Rear spring perch for the 1919-25 T's. Same as the T-3843-E except this one is drilled for the flip top oiler. Perch is the same, left or right. This is the perch only, it does not include the bushing, mounting nut, or oiler.
Part # T-3843-E | Model Year 09-18
Rear spring perch for 1909-18 Model T's. Perch is the same, left or right. Perch only, does not include the bushing or mounting nut.
Part # T-3834 | Model Year 09-27
4 castle nuts used to hold the rear leaf spring in the frame. U.S.A.
Part # A-5303-D | Model Year 09-31
An alternative to an expensive reamer. Drills your shackle bushings to proper bore. 1/2" shank.
Part # T-3820-T Model Year 09-31
Part # T-3844-T Model Year 09-31
Part # WEB-KIT-0227 | Model Year 09-27
These bushing drivers allow you to drive out the old bushings and install new bushings as well. U.S.A.
Part # A-5303-R | Model Year 09-31
Not a cheap adjustable reamer, this is an American made hand reamer for the job. Reams front and rear shackle bushings in T's or A's. U.S.A.
Part # T-3800 | Model Year 09-27
18 piece set for the front and rear spring shackles and spring clips. U.S.A.
Part # T-3811 Model Year 09-27
Part # T-3837 Model Year 09-25
Part # WEB-KIT-0220 | Model Year 09-27
Square headed bolt and nut that goes down through the center of the leaf springs, and holds the unit together. U.S.A