Part #
RA-1015
Model Year
09-31
Part #
RA-1016
Model Year
09-31
Part #
RA-1023
Model Year
09-31
Part #
RA-1025
Model Year
09-31
This tool is used for setting solid rivets and giving them a round peened appearance. Fits standard air hammers. U.S.A.
Part #
RT-2005
|
Model Year
09-27
Round headed steel rivet used to attach the axle housing tubes to the ends and center section. 7/32" x 3/4". U.S.A.
Part #
RT-2003
|
Model Year
09-27
Attaches hand brake quadrant to the frame. Four 1/4 D x 7/8" round head. See Model A section under "RIVETS" for installation tools.
Special tool that fits over the round head of the rivet for drilling out old brazier head rivets. The bucking bar is used to hold the round head of the new rivets when peening the other end. U.S.A.
Part #
RT-2000
|
Model Year
09-27
Used to install front cross member and reinforcing gussets. Kit consists of: Eighteen 1/4"" D. X 7/8"" Lg. Round Head Rivets, and Four 5/16" D. X 3/4" flat head rivets. U.S.A. Note: See Model A section under "RIVETS" for installation tools.
Part #
RA-1013
Model Year
09-31
Part #
RA-1014
Model Year
09-31
Part #
RA-1022
Model Year
09-31
Part #
RA-1024
Model Year
09-31
Used to set solid rivets and giving them a rounded peen. It is best to set them hot. U.S.A.
Part #
RA-1020
Model Year
09-31
Part #
RA-1021
Model Year
09-31
Part #
RA-1026
Model Year
09-31
Used for bucking the heads of rivets in tight areas, such as within the frame. Adjusts in and out. U.S.A.
Part #
RT-2002
|
Model Year
09-27
Kit consists of; Eight 1/4 D. X 7/8 Lg. Round Head Rivets. U.S.A. Note: See Model A section under "RIVETS" for installation tools.
Part #
RT-2001
|
Model Year
09-27
"Kit consists of Twenty-two 1/4 D. X 7/8 Lg. Round Head Rivets. U.S.A. Note: See Model A section under ""RIVETS"" for installation tools."