Snyders - Hardware

CASTLE MOTOR NUT SET

Part # T-2990 | Model Year 09-27

A set of 36 castellated nuts for the motor and transmission. U.S.A.

Drop shipped from manufacturer, allow Weeks

Made To Order, Allow Weeks

DISCONTINUED

Temporarily
OUT OF STOCK

$34.50 SET

Additional Information

COUNTERSINK TOOL

Part # T-3101-T | Model Year 09-27

Used to countersink the bolt holes in the inspection pan for use with the T-3101-BM bolt kit. U.S.A.

Drop shipped from manufacturer, allow Weeks

Made To Order, Allow Weeks

DISCONTINUED

Temporarily
OUT OF STOCK

$18.00 EA

Additional Information

DOMED WATER INLET BOLTS

Part # T-3015-MBX | Model Year 26-27

A pair of domed head bolts used to attach the water inlet to the side of the block. These were only used in 1926-27. U.S.A.

Drop shipped from manufacturer, allow Weeks

Made To Order, Allow Weeks

DISCONTINUED

Temporarily
OUT OF STOCK

$10.00 PR

Additional Information

DOMED WATER OUTLET BOLTS

Part # T-3004-MBX | Model Year 26-27

Dome headed bolts used to fasten the water outlet to front of the head. This unique bolt was only used on 1926-27. U.S.A.

Drop shipped from manufacturer, allow Weeks

Made To Order, Allow Weeks

DISCONTINUED

Temporarily
OUT OF STOCK

$10.00 PR

Additional Information

LOWER CRANKCASE COVER BOLTS

Part # T-3101-BS | Model Year 09-27

Hex head bolts to bolt the inspection cover on. Enough for 3 or 4 dip covers. U.S.A.

Drop shipped from manufacturer, allow Weeks

Made To Order, Allow Weeks

DISCONTINUED

Temporarily
OUT OF STOCK

$2.50 SET

Additional Information

OIL PAN BOLTS SEALED

Part # T-3101-BM | Model Year 09-27

This kit bolts the inspection pan to the bottom of the oil pan. Bolts have a washer surface under the hex head. An O-ring is slid over the bolt before it is threaded into the pan to seal the oil from leaking around the bolts. The bolt holes in the inspection pan must be countersunk with the T-3101-T tool to keep the O-rings from squeezing out. U.S.A.

Drop shipped from manufacturer, allow Weeks

Made To Order, Allow Weeks

DISCONTINUED

Temporarily
OUT OF STOCK

$49.95 SET

Additional Information

OIL PAN TO BLOCK BOLT KIT ORIGINAL STYLE

Part # T-3100-BMB | Model Year 11-27

bolts, castle nuts, and cotter pins for attaching the oil pan to the block, transmission cover, and timing cover. For 1919-27 T's with starters. USA

NOTE: These kits are now supplied with a standard headed bolt that has head markings. The cost to have another run of our thick headed bolts with no head markings made just got to be too high.

Drop shipped from manufacturer, allow Weeks

Made To Order, Allow Weeks

DISCONTINUED

Temporarily
OUT OF STOCK

$64.95 SET

Additional Information

OIL PAN TO BLOCK BOLT KIT REPLACEMENT STYLE

Part # T-3100-MB | Model Year 09-27

Replacement style bolts, nuts, and lock washers used to attach the oil pan to the block, timing cover, and transmission cover. A lesser expensive alternative to the authentic style thick headed bolts and castle nuts. This kit is also much easier to install since you don't have to mess with cotter pins! Fits 1919-27 T's with starters. U.S.A.

Drop shipped from manufacturer, allow Weeks

Made To Order, Allow Weeks

DISCONTINUED

Temporarily
OUT OF STOCK

$13.95 SET

Additional Information