Distributor & Timer
Show 18 Of 39
Showing 18 Of 39 results
Part # T-3161-BPK | Model Year 09-27
If your "T" already has the old style Bosch front plate and distributor, this kit gives you a new #009 style distributor and all that you need to install it in the old Bosch cover. U.S.A.
Part # T-3151 | Model Year 12-27
Fits the original Bosch front plate style distributors, not the current repo distributors. Shaft is 9" long. U.S.A.
Part # T-3222 | Model Year 19-27
Goes behind the timer brush and the timer to hold the timer felt in place. U.S.A.
Part # A-12000-CB | Model Year 28-34
Bracket to mount the 1928-34 ignition coil.
When running a distributor on your T, you need to use a modern style 6 volt coil. This is the bracket to hold the coil to the firewall or wherever you want to mount the coil. U.S.A.
Part # T-3206 | Model Year 12-27
Holds the brush in place and is used on all types of timers. U.S.A.
Part # T-3162-B | Model Year 19-27
This is the one long bolt that held the timer spring in place. Threads through the timing cover and into the generator. Modern head, not original thin head. U.S.A.
Part # T-3220 | Model Year 09-27
A special made nut that holds the timer brush assembly to the camshaft. U.S.A.
Part # T-3161-WK | Model Year 09-27
Complete set of wires for hooking up the modern T-3161 distributor. The kit consists of 4 plug wires with ends, and the wire for going to the coil. Also includes rubber insulating boots for all wires. U.S.A.