Part #
A-12000-12
|
Model Year
19-31
12-volt coil for use on any Model A or Model T running a distributor. Coil bracket must be purchased seperately. Does not require an external resistor.
Part #
A-12000
|
Model Year
28-34
This is the replacement type 6-volt coil. You must use the coil bracket with this coil. Used on all years of Model A's and Model T''s that are running a distributor.
Part #
7MM
|
Model Year
09-99
Sold by the foot. Non-returnable as it is cut to your custom ordered length. U.S.A.
Part #
8MM
|
Model Year
09-31
8MM Ignition wire that is commonly used for the spark plug wires. This wire is lacquered fabric coated wire that is black with a red tracer. OD is approximately .300". Copper multi-strand core. Sold by the foot. Non-returnable as it is cut to your custom ordered length. U.S.A.
Part #
T-3221-TSA
Model Year
09-27
Part #
T-3221-TSB
Model Year
09-27
The Anderson timer was a very popular aftermarket timer back in the T days. Includes the timer rotor. U.S.A.
Part #
T-3221-L
|
Model Year
1/4 oz. tube of extreme pressure lubricant recommended for lubricating the Anderson style timer contacts/brush assembly. Anderson timers come pre-lubricated but this will be needed for future maintenance. U.S.A.
Part #
T-3152-C
Model Year
12-27
Part #
T-3152-D
Model Year
12-27
Part #
T-3152-E
Model Year
12-27
Drive gear set used on the Atwater-Kent cast iron front plate distributor. U.S.A.
Part #
T-3150
|
Model Year
12-27
Replaces the original cam gear nut and has two notches sticking out to locate the distributor drive gear. Used for original Bosch Model FI-513 front plate distributors. U.S.A.
Part #
T-3152-A
Model Year
12-27
Part #
T-3152-B
Model Year
12-27
For the ORIGINAL front plate style distributors, not the current repo distributors. Sold as a pair, you get the gear for the distributor and the camshaft. U.S.A.