Part #
T-4608-N
|
Model Year
06-14
Small hex nut that is flat on one side and slightly domed on the other. U.S.A.
Part #
T-4617-N
|
Model Year
10-12
Large brass spur nut at the back of the coil used to adjust point tension. Slot for point fork will accept early and late repo points. U.S.A.
Part #
T-4600-OR
|
Model Year
09-13
For original size coils, not the later style like our T-4600 accepts. Unfinished does not include hardware, this box uses the 1911-12 style coils.
Part #
T-4600-ORL
|
Model Year
12-13
Wood box only , must use 1912-13 style coils. Correct for late 1912-13, uses Corbin style latches sold separately (T-4601).
Part #
T-4640-L
|
Model Year
09-13
Paper instruction sheet that was varnished under the coil box lid. 1909-13.
Part #
T-4602-E
Model Year
11-12
Box lid only, may require some fitting to box, unfinished. Correct screws and coil retaining strips included but not installed. Designed to be used with original style coils and to use Corbin style latches.
Part #
T-4600
|
Model Year
09-13
Wood boxes made to accommodate the later size coils (T-5007, T-5007-W). Boxes come with holes drilled. You will need to elongate the terminal holes in your firewall slightly due to later coil terminal span. 1909-13. U.S.A.
Part #
T-4607-N
|
Model Year
08-13
4 brass nuts and 4 washers, special 5/16-20 thread with a 19/32" hex.