Part #
A-17756-A
|
Model Year
26-30
This heavy steel backing plate is the early design. It was used from the beginning of production until around March of 1930. Powder coated black! U.S.A.
Part #
T-3102-FMB
Model Year
26-27
Part #
T-3102-RMB
Model Year
26-27
All the hardware needed to mount the bumper brackets to the frame.
Part #
T-3109-SX
|
Model Year
26-27
You will need two for the front, and two for the rear. They come in a black finish. They were painted black originally.
Part #
T-3109-FXB
|
Model Year
26-27
Nice shiny stainless steel bars for the front or rear of the 1926-27 Model T. U.S.A.
Part #
A-17762-A
|
Model Year
26.28
Used from the beginning of production until April of 1928. Comes with nut and lock washer. Clad style. This small clamp goes in the middle of the bumper bars to keep them from vibrating. U.S.A.
Part #
A-17765-B
|
Model Year
26-31
This is the small backing plate for the center bumper clamp. This narrower style was used on the 29-31 A's that used the oval style center clamp, but will work on all years. This backing plate is used with the A-17762-A. Serves as a washer on the back side of the bumpers. U.S.A.
Part #
T-3102-FX
|
Model Year
26-27
Heavy steel brackets that come off of the frame for bumpers to mount to. Fit before painting as they may need adjustments made to them. U.S.A.
Part #
T-3102-SR1
Model Year
26-27
Part #
T-3102-SRH
Model Year
26-27
Heavy steel bumper brackets that attach to frame of the T. Available in two styles, one for running a full bar across the back or split bars. Works on any 1926-27 body style with steel sub rails. U.S.A.
Part #
T-3145-FXS
|
Model Year
26-27
The split style stainless steel bumper bars. You can run solid or split bars on the back of your T depending on the brackets you have.