Part #
T-9488
|
Model Year
26-27
Plates get riveted to the side of the deck opening about 3 to 4 inches above the panel below the deck lid opening. When the deck lid closes, these plates keep it centered in the opening. Used on Coupes and Roadsters. Sold in pairs only. U.S.A.
Part #
A-41518
|
Model Year
26-32
The rubber bumpers for the upper corners with a rumble or the lower corners with a trunk. These are also used on 1926-27 Model T's. U.S.A.
Part #
T-9485-C
Model Year
26-27
Part #
T-9485-H
Model Year
26-27
Hinges for the 1926-27 Roadster or Coupe deck lid.
Part #
T-9485-L
|
Model Year
23-27
Complete latch assembly as originally used. Key must be purchased separately. Works on Coupes and Roadsters. Some early lids used a latch without a backing plate, remove backing plate for those applications.
Part #
T-9486-X
|
Model Year
26-27
For the 1926-27 Coupe only. Rivets to the bottom of the rumble rain gutter on the left (drivers) side and is what the deck lid support T-9486-SBC catches on to keep the deck lid open. U.S.A.
Part #
T-9485
Model Year
26-27
Part #
T-9485-CO
Model Year
26-27
Excellent quality deck lids made by Wescott. Steel reinforced. U.S.A.
Part #
T-9486-R
|
Model Year
26-27
Attaches to the drivers side turtle deck rain gutter and provides the catch for the deck lid support arm. 1926-27 Roadster only.
Part #
T-9484-A
Model Year
15-25
Part #
T-9484-X
Model Year
26-27
The key to open the turtle deck on your T and protect your 5 gallon jug of moonshine!
Part #
T-9486-SBC
Model Year
26-27
Part #
T-9486-SBR
Model Year
26-27
This bracket holds the deck lid open. Used on 26-27's. U.S.A.