Part #
T-4819-X
|
Model Year
13-14
Fastens the carbide generator to the running boards. Correct style bolts and nuts. 1913-14.
Part #
T-4813-BS
|
Model Year
26-27
Carriage bolts and nuts needed to mount the running boards to the brackets. U.S.A.
Part #
T-4813-BSR
Model Year
13-20
Part #
T-4813-BSX
Model Year
09-16
Part #
T-4818/19-BX
Model Year
13-14
Part #
T-4813-BSL
Model Year
21-25
Correct head style bolts used to attach the running boards to the braces and the running boards to the fenders. Kit includes 16 bolts and 16 nuts.
T-4813-BSX is used with running boards that have 1/4" square fender holes 1909-16.
The T-4813-BSR set contains the same quantity of bolts and nuts. Used with reproduction running boards that have 5/16" square fender holes 1913-25.
The T-4818/19-BX set contains the same quantity of bolts and nuts. Used with running boards that have 1/4" square fender holes and includes the gas generator mounting bolt and nut set. U.S.A.
Part #
T-4822-E
Model Year
09-16
Part #
T-4822-A
Model Year
17-25
Part #
T-4822-B
Model Year
26-27
The hard wood blocks that form a cushion between running board and bracket. 1909-16 sets include 8 blocks as they are used where fenders mount to board also. U.S.A.
Part #
RT-2004
Model Year
09-21
Part #
RT-2004-S
Model Year
21-27
Rivets the running board brackets to the frame. One kit per car. U.S.A.
Part #
T-4815
|
Model Year
09-27
Spring wires hold these cocoa mats to the running board. Acts as a step plate so people don't step on your nice painted running boards. Mat is 9" x 15". U.S.A.
Part #
T-4816-D
|
Model Year
21-27
Can only be used on the later T's with the stamped steel running board brackets. Brace runs from side to side under the car and uses the same bolt holes that hold the running boards to the braces. Kit comes with longer bolts. Gives extra support when you step on the running board. Total length is 60 inches. Order one for the Coupe/Roadster, two for the Sedan/Touring. U.S.A.
Part #
T-4816/17-A
Model Year
09-09
Part #
T-4816/17-B
Model Year
10-15
Part #
T-4816/17-C
Model Year
16-21
These heavy rods run under the frame and support the running board brackets. Sold in pairs only. U.S.A.
Part #
T-4812-A
|
Model Year
09-09
This 1909 running board has nine ribs running lengthwise of the board except where mounting holes break the line. Authentic in every detail! Some early 1910 cars also use this design. U.S.A.