Part #
T-3640-C
Model Year
17-22
Part #
T-3640-D
Model Year
23-27
Attaches the firewall to the frame. Sold in pairs. U.S.A.
Part #
T-3638-E1
Model Year
09-09
Part #
T-3638-E2
Model Year
09-10
Part #
T-3638-E3
Model Year
11-12
Part #
T-3638-E4
Model Year
12-12
Part #
T-3638-E5
Model Year
13-14
Part #
T-3638-E6
Model Year
15-15
Part #
T-3638-E7
Model Year
15-17
Part #
T-3638-E8
Model Year
17-18
Part #
T-3638-E9
Model Year
18-19
Part #
T-3638-E10
Model Year
19-23
Exact duplicates made to the original Ford prints. 1909-12 are a 2-piece design, later years are 1-piece. They attached to the bottom of the firewall just above the back of the cylinder head. U.S.A.
Part #
T-3635-E
|
Model Year
11-12
Comes in 84" long lengths, 3/4" inside the legs. This style was used in 1911-12. Has an oval top instead of a flat top like the later style.
Part #
T-7836-ST
Model Year
09-14
Part #
T-7836-N
Model Year
09-14
Part #
T-7836-W
Model Year
09-14
5/16" hardware used to attach windshield brackets and dash brackets on the early T wooden firewalls. Threads are 5/16-18.
Part #
T-3634
|
Model Year
09-10
Made of 3/4" thick Mahogany plywood. Comes with holes drilled. Includes the windshield riser board. U.S.A.
Part #
T-3634-A
|
Model Year
10-11
Made of 3/4" thick Cherry plywood. Comes with holes drilled. Includes the windshield riser board. U.S.A.
Part #
T-3634-C
|
Model Year
13-14
Made of 3/4" thick Cherry plywood. Comes with holes drilled. This one is 21 1/2" tall on the outside edge. U.S.A.
Part #
T-3634-D
|
Model Year
15-16
Made of Birch plywood with holes drilled. U.S.A.
Part #
T-3634-E
|
Model Year
17-21
This Birch plywood firewall was used on the late 1916 non-brass radiator T's up until the 1921 non-starter T's. U.S.A.