Battery

|
Show 9 Of 17
Showing 9 Of 17 results
Part # T-5158/59 Model Year 21-27
Part # T-5158/59-S Model Year 21-27
This is a very good repo of the original style battery box. The box was never script originally, but we have both to offer. Note: Only script box is licensed. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.00 EA
Part # T-5046 | Model Year 19-27
We stock the authentic battery cable with a woven loom and an off set design clamp just like Henry used. This cable runs from the battery to the starter switch. 2/0 cable. 35" long. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$21.50 EA
Part # T-5047-CD Model Year 19-27
Part # T-5047-OR Model Year 19-27
The complete battery cable support bracket with rubber bushing. We offer a replacement style or an authentic version for the show cars.  Either one will do the job.  U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.00 EA
Part # T-5150-A | Model Year 19-27
Original style battery carrier. Heavy metal frame riveted together. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$54.50 EA
Part # T-5152 Model Year 19-22
Part # T-5152-B Model Year 23-27
An exact duplicate of the original Ford clamp that holds the battery in place. The later style is about 1/2" longer. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.00 EA
Part # A-14300-D | Model Year 28-31
This switch gets spliced in the cable going from the battery to the starter switch. If you ever would run into an electrical problem, this will cut off all the power. Works equally well on the Model T and Model A.
DISCONTINUED
Temporarily
OUT OF STOCK
$26.50 EA
Part # A-5164-12 Model Year 19-31

Keeps a charged battery charged. DOES NOT CHARGE A DEAD BATTERY!

Charges battery to a full charge then goes into trickle mode to keep your battery fully charged, but not overcharged. Comes with terminals that can be mounted permanently on battery so unit is simple to plug in when vehicle is parked.

DISCONTINUED
Temporarily
OUT OF STOCK
$1.00 EA
Part # A-5165-X | Model Year 19-31
This model features Battery Saver's signature State-of-the-art Pulse Desulfation Technology and can safely maintain a single vehicle battery. The advanced microprocessor can easily determine battery type, size and condition to deliver the optimal maintaining for that specific battery/battery system. The 1000L Gen. 3 features a revamped and redesigned Digital Battery Tester to deliver accurate voltage readings, the AMP power to the battery and a percentage of life bar to show how healthy the battery or batteries are. Works on 6 or 12 volt.
DISCONTINUED
Temporarily
OUT OF STOCK
$69.95 EA
Part # T-5149 | Model Year 19-27
Board is 7/8" thick and notched on ends to rest in the bottom of your battery carrier. When using a modern battery in your "T", this will raise the height of your battery so original style clamps can be used to hold battery.
DISCONTINUED
Temporarily
OUT OF STOCK
$12.00 EA