Part #
T-2532-E
|
Model Year
09-12
Slotted oil drain plug used on rear end and in oil pan. U.S.A.
Part #
T-2545
|
Model Year
09-27
1/8" NPT grease cup used on the rear axle & steering box. Cad plated. Inside is threaded to 1/8" NPT so you can install a modern grease fitting if desired. U.S.A.
Part #
T-2529
|
Model Year
09-27
These thrust plates are made from "A" grade steel and precision ground to correct thickness. 4 are needed per car. U.S.A.
Part #
T-2505-OR
|
Model Year
12-27
Now our own manufacture! A tough oil hardened alloy steel axle shaft with precision ground bearing surface. Use the differential gears from your old axles. This is a stock length axle. Made of SAE 4130 steel!
Part #
T-2531-B
|
Model Year
17-27
These steel pins keep the T-2529 plates from turning. 2 per axle housing and 2 go in the differential. U.S.A.
Part #
T-2529-SHA
Model Year
09-27
Part #
T-2529-SHB
Model Year
09-27
Spring steel shims for the differential thrust washers. Available in .010" or .015" thicknesses. Used for setting clearance in the T-2528 thrust washers. U.S.A.