Part #
T-2510-C
Model Year
09-27
Part #
T-2510-C-Q2
Model Year
Heavy 1" felt seal used as an oil seal. Jammed into housing in the back of the outer roller bearing. Need as many as three per axle. U.S.A.
Part #
T-2511-AS
|
Model Year
09-27
Install these seals behind the outer bearing and sleeve to prevent rear end oil from leaking on the brakes.
Part #
T-2510-B
Model Year
09-27
Part #
T-2510-B-Q2
Model Year
Heavy felt washer that seals in the grease for the outer bearing. Keeps the dirt and grime out. Installs between the T-2510-A and the T-2510 housing cap. Need 2 per car. U.S.A.
Part #
T-2510-AM
Model Year
09-18
Part #
T-2510-BM
Model Year
18-27
Aluminum sealed cap that replaces your old housing cap, outer felt, and bearing washer. keeps oil in the rear end where it belongs! U.S.A.
Part #
T-2597-A
Model Year
09-27
Part #
T-2597-B
Model Year
09-27
Part #
T-2597-C
Model Year
09-27
Part #
T-2597-D
Model Year
09-27
Pinion gear only that mounts to the end of the drive shaft. Available in 4 different tooth counts. U.S.A.
Part #
T-2508
|
Model Year
09-27
A good quality U.S. made bearing. The only drawback with these bearings is that they do not have the grease grooves in the rollers like the originals did so you have to be sure to keep them well greased.
Part #
T-2503-MB
|
Model Year
09-27
7 bolts, 7 nuts, and 7 washers for the end housing. U.S.A.
Part #
T-2505
|
Model Year
12-27
Now our own manufacture! A tough oil hardened alloy steel axle shaft with precision ground bearing surface. Use the differential gears from your old axles. The T-2505 is made 1/16"" longer to accommodate worn hubs. Made of SAE 4130 steel!
Part #
T-2506
|
Model Year
09-27
A tough fiber washer that fits between the axle shafts within the T-2526-B spider. Included in the T-2504-S rear end gasket kit. U.S.A.