Part #
LT-47
|
Model Year
09-31
License plate topper steel 4-3/4" overall height, 3-1/2" diameter circle.
Part #
T-3664-CH
|
Model Year
09-21
An accessory license plate holder with a crank holder. The crank holder can be locked to prevent the crank from being used. Plain brass. Will only work on 1909-21 Model T's that had the front leaf spring held in place with 4 castle nuts. U.S.A.
Part #
T-3664-CHPO
|
Model Year
09-21
An accessory license plate holder with a crank holder. The crank holder can be locked to prevent the crank from being used. Polished brass. Will only work on 1909-21 Model T's that had the front leaf spring held in place with 4 castle nuts. U.S.A.
Part #
A-18818
|
Model Year
09-31
The Auto Dolly makes manueuvering cars around the garage a breeze. Jack the car up and let it down on these dollies. U.S.A.
Part #
T-789678-S
Model Year
17-27
Part #
T-789678-SE
Model Year
08-16
Part #
T-789678-R
Model Year
17-27
Part #
T-789678-RE
Model Year
08-16
Part #
T-789678-C
Model Year
09-27
Part #
A-789678-P
Model Year
09-31
A very nice custom fit cover. Made of polycotton material. These covers are made for indoor use only. They are not to be used outdoors. They are water repellent, but not waterproof. U.S.A.
Part #
T-8013-BS
|
Model Year
09-27
Connects V-8 Stromberg or Holley carbs to the elbow style intakes. Aluminum, U.S.A.
Part #
T-8013-VW
|
Model Year
09-27
Used with our T-8011-A intake manifold. Allows you to use early Solex 30PICT-2 carburetors with 30mm bore, 53mm bolt spread. This carb has a 12 volt choke assembly. Aluminum. U.S.A.
Part #
T-5761-X12
Model Year
19-27
Part #
T-5761-X6
Model Year
19-27
Dual contact bulbs with straight across style pins. These are to be used with the dual contact style T-5761-X dash lamp.
Part #
T-5761-X
|
Model Year
19-27
Chrome plated with built in switch assembly. Hole spacing is 1-3/16" not a perfect match but works nicely. Bulb not included, you must use T-5761-X6 for 6 volt, or T-5761-X12 for 12 volt with this lamp. U.S.A.