Pickup Truck

|
Show 72 Of 79
Showing 72 Of 79 results
Part # A-80300-R3 | Model Year 28-29
Backrest retainer clip set. Mounts to second hole in from each side where upper and lower cab back panels are bolted together. Holds the top of the backrest spring. 1 set is pictured, 2 sets are required. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$19.95 SET
Part # A-821-A Model Year 28-29
Part # A-821-A1 Model Year 28-29
Part # A-821-B Model Year 30-31
Part # A-821-BL Model Year 31-31

For Pickup trucks, this is the sheet metal riser that your seat springs sit on. If you have a late 31 pickup cab and you're not sure which one to order, please see the measurements we have illustrated on part number A-821-B or A-821-BL. U.S.A.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-1034 | Model Year 28-29
These stamped brackets go between the sub-rail and the sill plate on the 28-9 Roadster Pick-ups. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$49.95 PR
Part # A-80302 | Model Year 28-29
Used on the 1928-29 Pick-ups. Mounts inside the striker area to help hold weatherstrip. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$4.95 EA
Part # A-1032-A Model Year 28-29
Part # A-832-A Model Year 28-29
Part # A-1032-B Model Year 30-31
Part # A-432-BF Model Year 30-31

These are the rails at the bottom of the body that all of the floor pans and body panels attach to. The A-432-BF is actually the full length rails that are used on the Tudor Sedan, but the front section will work on the 1930-31 Pickup.

They must be cut down for use on the truck.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-817-BKT | Model Year 28-29
If you have an A-817-A Sun Visor or any other reproduction sun visor you will need these brackets. They are used to install the visor cover kit. Original visors will already have these brackets but all aftermarket sun visors are made without them. Also for use with KIT#5R and KIT#5RS visor covers. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$19.00 PR
Part # A-45481-X | Model Year 28-29

Threaded stud that the windshield swing arms slide on and is what the A-45482 swing arm nut threads onto. Attaches to the windshield pillar of the body. Used on 1928-29 Closed Cab Pickups and 1928-29 Panel Delivery. U.S.A.

Sold individually

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$15.50 EA
Part # TK-1200 Model Year 19-31
These kits have everything that you will need to redo your top, except silicone glue. For Closed Cab only. 1928-31
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-83944 | Model Year 30-31
Goes at the top rear corner where the wood over the door stops. Takes 2 for a truck. Used on all 1930-31 closed cab trucks. Includes hardware.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$15.95 EA