Part #
A-877-A
Model Year
28-29
Part #
A-877-B
Model Year
30-31
Roadster Pickup cab backs. The 1930-31 is actually made up in 3 pieces and welded together. U.S.A.
Part #
A-1033-P
|
Model Year
28-29
Sill plates for the 1928-29 Roadster Pickup trucks. Very similar to the roadster sill plates except these are notched to go around the seat riser. Steel as original, sold in pairs only. U.S.A.
Part #
A-702350-P
|
Model Year
26-29
A very nice chrome repro handle with a black insert. For the 1926-27 Coupe Tudor Sedan as well as the 1928-29 Closed Cab Trucks.
Part #
A-80305
|
Model Year
28-29
This is the panel above the windshield. It runs from the windshield to the top. The top wood header and sun visor sit on top of this panel. 1928-29 Closed Cab Pickup truck only. U.S.A.
Part #
A-8050-ABRCC
Model Year
Part #
A-8051-ABRCC
Model Year
A 2 piece metal structure that is welded into position needed if you delete the door post wood. Used on street rods only. Fits 1928-29 closed cab trucks.
Part #
A-1050-AP
|
Model Year
28-29
If only the bottom of your 1928-29 Roadster Pickup quarter panel is bad, we can offer these patches. They have the bead on them and come up 6". U.S.A.
Part #
A-47301-AOR
|
Model Year
28-29
Exact copy of the steel rain gutter used on the 1928-29 Closed Cab Trucks. 30-3/4" long.
Part #
A-47301-BOR
|
Model Year
30-31
Exact copy of the rain gutter used on the 1930-31 Closed Cab Trucks. 31-1/2" long. This same style of gutter was used on some of the panel trucks so consequently we're often asked if we can supply this in a longer length. Unfortunately, we die stamp these rather than roll form them so longer lengths are not possible. You'll have to find yourself a good welder and weld lengths of these together.
Part #
A-831-A
|
Model Year
This brace runs from sub rail to sub rail at the rear of the cab and lower cab back panel attaches to it. 1928-29 Closed Cab Truck. U.S.A.