Pickup Truck

|
Show 36 Of 79
Showing 36 Of 79 results
Part # T-8320-B | Model Year 22-29
Glues to the bottom of the A-842-A door garnish molding. The raised lip protrudes up into the slot in the molding where the door actuating lever moves back and forth. Keeps the actuating arm from rattling against the garnish molding. Used on 1926-27 Coupe and Tudor Sedan as well as 1928-29 Closed Cab Pickup Trucks. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$3.95 PR
Part # A-80303 | Model Year 28-29
Ever wonder what the hole was for above the outside door handle? This little rubber plug fits in the hole if you're not using the A-702350-L remote lock cylinder. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$6.95 EA
Part # A-833-X | Model Year 28-29
Used on the 1928-29 closed cab truck only. These brackets tie the rear door post to the sub rail. The edge of the seat riser is also attached to this bracket.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$89.95 PR
Part # A-80085/87 | Model Year 28-29
A two piece door striker assembly for the 1928-29 Closed Cab Trucks. This is what the door latch engages with on the door post to keep the door shut.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$10.60 EA
Part # A-1046-AR Model Year 28-28
Part # A-1047-AR Model Year 28-28
Part # A-1046-A Model Year 29-29
Part # A-1047-A Model Year 29-29
Part # A-1046-B Model Year 30-31
Part # A-1047-B Model Year 30-31

New repo steel doors for the Roadsters, Roadster Pickups, and 4-door Phaeton front doors. Comes with hinges. Note: The 1928 doors do not have any provisions for an outside door handle, but the 1929 doors do. Order according to whether you want outside door handles or not. U.S.A.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-80330-A | Model Year 28-29
The 4-hole mount male dovetail. Chrome plated. For the 28-29 Closed Cab Trucks.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$3.95 EA
Part # A-80333 | Model Year 28-29
The female dovetail for the 28-29 Closed Cab Trucks. They have the rubber already installed on them.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$10.75 EA
Part # A-832-AEX | Model Year
Used to convert a 1928-29 closed cab truck cab to an extended cab truck. These rails are 6" longer than factory sub rails. You would use these if you are using the extended cab corners.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$395.00 PR
Part # A-1032-ASSY Model Year 28-29
Part # A-1032-BAS Model Year 30-31
If you need to replace the sub rails, the cross channels and the floor pans in your roadster pick-up, this is it. The whole floor pan is assembled ready to go under your truck. Available for 1928-29 Roadster Pickup, and 1930-31 Roadster Pickup. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks