Pickup Truck

|
Show 18 Of 79
Showing 18 Of 79 results
Part # A-877-X | Model Year 28-29
This special steel strip is used where the upper (A-877-ACU) and lower (A-877-ACB) cab back panels bolt together. Slides over the flanges to provide support for the bolt holes as well as making the center of the panels rigid. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$34.95 EA
Part # A-877-ABR Model Year 28-29
Part # A-877-BBR Model Year 30-31

Brackets used on Roadster Pickup cabs. They go in the very back of the cab and tie the cab back panel to the sub rails. Sold in pairs only. U.S.A.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-870-MB | Model Year 28-29

Hardware used to bolt the upper and lower cab back panels to the corner panels of 28-9 Closed Cab trucks.  Hex head bolts are the correct 3/8" hex head as original.  USA 

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$19.50 SET
Part # A-870-ACL Model Year
Part # A-870-ACR Model Year
Rear cab corner panels for the 1928-29 closed cab truck. These corners are six inches longer than stock cab corners to lengthen the cab and give you more legroom.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-877-ACB | Model Year 28-29
The complete lower panel for the back of the 28-9 Closed Cab Truck. Very nice repo. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$225.00 EA
Part # A-46300-TSK Model Year 28-29
Part # A-46300-TSU Model Year 28-29
Part # A-46300-TSM Model Year 28-29
Part # A-46300-TSL Model Year 28-29

Solid steel hinges with oilite bushings installed at pivot points. Hinges come ready to install with all mounting holes and stainless hinge pins.

Fits 1928-29 Closed Cab Trucks and Panel Deliveries.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-8046-ACC Model Year
Part # A-8047-ACC Model Year

These doors 1928-29 closed cab trucks and 1926-27 coupe and tudor sedans. Door only, hinges, latches, garnish etc are not included.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-877-ACU | Model Year 28-29
The complete upper panel for the back of the 28-9 Closed Cab Truck. Very nice repo. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$245.00 EA
Part # A-870-ACC | Model Year 28-29
A pair of complete cab corners for the 28-9 Closed Cab Trucks. Exact in every detail. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$355.00 PR