Show 9 Of 78
Showing 9 Of 78 results
Part # A-80081 Model Year 26-29
Part # A-80082 Model Year 26-29
Finally, new American made latches that fit the 1928-29 Closed Cab Truck as well as the 1926-27 Coupe and Tudor Sedan.
The latch body is zinc plated, the actuating arm is nickel plated as was the original. The latches function just like the originals, the driver's side will lock and the passenger side has provisions for the lock cylinder. U.S.A.
An Excellent Reproduction!
Part # A-80300-R1 Model Year 30-31
Part # A-80300-R2 Model Year 30-31
Holds the backrest spring in position on 1930-31 Closed Cab Pickup truck cabs. Several different styles have been found. We have 2 of the variations available. U.S.A.
Part # A-47301-A | Model Year 28-31
An Aluminum gutter. Two piece snap on type which you bend to the roof contour. Fasten the flat piece to the roof, and the the gutter piece will snap onto it. Will work on any car that has wood to nail into where they mount. One set does both sides. When bending, you must snap the two pieces together and bend as an assembly. Use wax paper between the two pieces when bending to make them come apart easier. These gutters are 45" long and are used for pickup trucks and coupes. U.S.A.
Part # A-47301 | Model Year 28-31
An aluminum gutter. Two piece snap on type which you bend to the roof contour. Fasten the flat piece to the roof, and then the gutter piece will snap onto it. 90" long. Will work on any car that has wood to nail into where they mount. 1 set does both sides. NOTE: gutters are supplied in a straight length, snap the two pieces together with a piece of wax paper between them so once you have bent them, they will come apart easily. U.S.A.
Part # A-878 Model Year 28-31
Part # A-878-L Model Year 31-31
This panel bolts to the frame between cab and bed. Lip sticks up between bed rails to keep cargo clean. U.S.A.
Part # A-80306 | Model Year 30-31
These large headed carriage style bolts held the piece of wood in the back of the cab about in the middle. The heads show on the outside. These same style of bolts were used to hold the vertical pieces of wood in the cab that the seat backrest mounted on. 5 bolts, nuts, washers per kit. U.S.A.
Part # A-877-S | Model Year 28-29
Used on the 1928-29 closed cab trucks. This heavy metal strip lays on top of the lower mounting lip of the A-877-ACB lower cab back panel. Supports the lower cab back panel mounting flange where it gets bolted to the A-831-A cab sill. U.S.A.
Part # A-876 | Model Year 28-29
Fits in the upper back corner of the 28-9 Closed Cab Truck. U.S.A.
Part # A-877-MB | Model Year 28-29
Hardware used to bolt the upper cab back to the lower cab back on a 1928-29 closed cab truck. 4 round head screws, 2 hex head bolts (for the seat clips), square nuts and lock washers. Hex bolts are NOT authentic style with the odd 3/8" head.