Part #
AA-35130/31-B
|
Model Year
29-31
Used on 1929-31 Ton trucks with the 4 speed transmissions. Notch in the the main board is 8" wide, 7" deep. 7 ply birch veneer. U.S.A.
Part #
AA-5115-B
Model Year
28-31
Part #
AA-5115-C
Model Year
28-31
Part #
AA-5115-D
Model Year
28-31
Part #
AA-5115-E
Model Year
28-31
Used on the AA trucks when U-bolts were used to hold the bed or platform to the frame. U-bolt passes through the end of the bracket, opposite side of the bracket slips between frame rail to prevent it from being bent or collapsing when tightened.
Measure frame for length. U.S.A.
Part #
AA-2051
|
Model Year
30-31
Holds the front brake wedge in place on the 1930-31 AA trucks. U.S.A.
Part #
AA-4830-GS
|
Model Year
28-29
This set is for the dual high transmission that was used on the 28-9's. U.S.A.
Part #
AA-7213
|
Model Year
29-31
This gear shift knob was used on the later 4-speed transmissions which were used from late 1929 through 31. Knob has 3/8-24 threads. U.S.A.
Part #
AA-7212
|
Model Year
28-31
The small rod that parallels the gear shift lever and allows you to shift the 4-speed transmission into reverse. U.S.A.
Part #
AA-7227
|
Model Year
29-31
The heavier spring that goes just above the pivoting cup and below the (BB-7220) shift lever housing cap that holds the shift lever into the transmission tower. Used on the 4-speed transmission only. U.S.A.