Part #
A-1506-20
|
Model Year
26-31
20" RUBBER STEM TUBE - Straight Stem. Used in the TT Rear Wheels and the AA 1 Ton Truck. Very good quality. The rubber stem tubes end up costing a lot less in the long run since you don't have to purchase all of the additional hardware. Our rubber stem tubes are 100% butyl rubber, not a recycled blend!
Part #
AA-4521-AR
|
Model Year
28-29
Universal joint housing cap shim. The steel shim is about .072 thick, and comes with a gasket. U.S.A.
Part #
AA-7095
|
Model Year
29-31
Rear universal joint retaining washer. Used for retaining the universal joint to the drive shaft on AA trucks. Also used on the AA-4811 coupling shaft gear with 4-speed transmissions. 1929-31. U.S.A.
Part #
AA-4000-FSK
|
Model Year
28-28
3-piece set of felts for sealing the inner axle and the end of the drive shaft. Same as buying our AA-4000-AF and AA-4000-WF. Saves you a little bit of money buying all 3 at once. 1928-29 AA truck worm style rear axle only. U.S.A.
Part #
AA-4616-AR
|
Model Year
19-29
Sleeve that the OD of the roller bearing rides in on either end of the worm gear. Also used in the TT truck rear end. 2 required. U.S.A.
Part #
AA-4700-R
|
Model Year
28-29
This seal goes just ahead of the front roller bearing in the rear end. It keeps the rear end oil from entering into the torque tube. U.S.A.
Part #
AA-4000-WF
|
Model Year
28-28
This felt was only used in the 1928-29 AA Truck worm drive rear ends. The felt fit into a cup that presses into the back of the torque tube where it attaches to the rear end. Original Ford number A-22435-R. U.S.A.