Part #
A-1025-CR
|
Model Year
28-31
These are required on all Model TT trucks with wood wheels and for Model A's with 20" wheels as well. Flaps cradle the inner tube where it meets the wheel rim and the bead of the tire. U.S.A.
Part #
L6020-BW
|
Model Year
19-31
Used on the 1919-27 TT truck rear wheels only. This tire fits the 20" (30X5) rims only. Also used on 1928-31 Model AA 1 ton trucks both on the front and rear. Very nice tread pattern for commercial vehicles. 6 ply nylon. 1350 lb load rating.
Part #
AA-7223
|
Model Year
29-31
Goes between transmission case and the shifter housing. U.S.A.
Part #
AA-7153
|
Model Year
29-31
All the gaskets for the 4-speed AA truck transmission. Includes different thickness gaskets for fitting PTO to case. U.S.A.
Part #
TK-1200
|
Model Year
19-31
This kit is for pickup trucks. Contains 4' of long grain cobra top decking with hidem' style welting to finish it off.
Part #
AA-7221-B
|
Model Year
30-31
Later transmissions that had a threaded cap to hold the shift lever in place used this single locating pin rather than the double pins.
Part #
AA-7221
|
Model Year
28-31
These two pins were used for locating the the shifting lever in the early AA truck transmission towers. U.S.A.
Part #
A-1506-20
|
Model Year
26-31
20" RUBBER STEM TUBE - Straight Stem. Used in the TT Rear Wheels and the AA 1 Ton Truck. Very good quality. The rubber stem tubes end up costing a lot less in the long run since you don't have to purchase all of the additional hardware. Our rubber stem tubes are 100% butyl rubber, not a recycled blend!