Wiring

|
Show 36 Of 49
Showing 36 Of 49 results
Part # A-14598 | Model Year 28-31
Clip that holds the main lighting wire harness on the left frame rail. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$1.75 EA
Part # A-11646 Model Year 28-31
Part # A-11647 Model Year 28-31
This Ford Model A lighting wire harness is made for one or two bulb headlights. If you have a two bulb headlight and want to use cowl lights - just add the cowl light wire to parking light terminal. The one bulb harness has the cowl light wire in it. Harness runs from bottom of steering column out to both headlamps, horn, stop lamp switch, and 1 tail lamp. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-11646-T Model Year 28-31
Part # A-11647-T Model Year 28-31

This harness gives you everything our regular lighting harness does, plus it has all the wires for directional lights. Designed to hook into the wires of the Signal Stat signal levers which are our part numbers A-13310-X and A-13310-XF. 

Harness is designed to hook into two factory style tail lights and the wires for the front signal lamps mounted in the bumper bars.  U.S.A.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
Part # A-14486 | Model Year 09-31
The small wire ends that get crimped onto the wire ends to plug into the A-14487 wire connectors. These normally require a special wire crimping tool to install. I prefer to solder these in place instead. Strip about 1/4" of your wire, dip it in flux, stick into the bullet and solder. Then snip off the excess wire/solder or hit with a belt sander. Now you have a good positive connection. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$0.45 EA
Part # A-14581 | Model Year 29-31
This piece slips up on the headlight wire conduits and holds the conduits to the headlight sockets. These come with conduit sets. Stainless. U.S.A.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$3.25 EA
Part # A-14582-SS | Model Year 29-31

A complete set of the conduits that come out of the radiator shell. One for the horn, and two for the headlights. 9/16" size. Ferrules included. Horn conduit is 8-1/8" long, headlamp conduits are 7-1/2" long. Conduits are stainless steel.

They fit the later style 1929 headlamp buckets through the end of production in 1931. The headlamp buckets that these fit had the 13/16" I.D. socket holder that mounted inside the base of the headlamp. The socket that stuck out of the headlamp for the conduits to attach to was about 25/32" O.D. U.S.A.

Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$34.95 SET
Part # A-14560 | Model Year 28-31
The complete terminal box. Comes with mounting hardware, wing nuts, and cover.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$10.50 EA
Part # A-14561-WN | Model Year 28-31
For the terminal box.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$2.00 PR
Part # A-14561-A | Model Year 28-31
This is the lid only for the terminal box.
Drop shipped from manufacturer, allow Weeks
Made To Order, Allow Weeks
DISCONTINUED
Temporarily
OUT OF STOCK
$2.25 EA