Part #
A-1012-B
Model Year
28-31
Part #
A-1012-B-Q23
Model Year
This is a cadmium lug nut which is what the model A had on it when it rolled off the assembly line. Sold individually or in a set of 23. USA
While not correct, these will also fit on 1926-27 model T's with wire wheels and early 28 model A's.
Part #
A-1012-C
Model Year
28-31
Part #
A-1012-C-Q23
Model Year
28-31
Same original shape but these are chrome plated instead of being cad plated. These nuts will fit 1928-31 model A's. Sold individually or in sets of 23.
While they're not correct for 1926-27 model T's with wire wheels, they will work.
Part #
A-1012-LN
|
Model Year
28-29
Original equipment on all 1928-29 Model A's with rear mounted spares. Head of nut is machined so you can put a lock on it. Cad plated.
Part #
A-1017
|
Model Year
09-31
Just the thing for cleaning those wire wheels. Let your wife use it to clean bedsprings! U.S.A.
Part #
A-1016-TX
|
Model Year
A handy tool for straightening spokes of wire wheels. Will accommodate spokes to 1/4" diameter. Works like a slide hammer, the end of the rod has a groove in it to hook around the spoke then you slide the heavy slider against the opposite end of the tool to pull outward on the spokes.
Part #
A-1016-T
|
Model Year
26-31
When repairing old spoke wheels, these handy tools make spoke straightening a breeze! Tools are hardened! U.S.A.
Part #
A-1012-SS
|
Model Year
28-31
Made to the original specs and buffed to a high luster. You'll never have to replace these! U.S.A.
Part #
A-1013
|
Model Year
26-31
Lifting and aligning your wheel with the wheel studs can often difficult, especially as we get older! Simply thread the 2 wheel buddy alignment pins over 2 wheel studs, align the wheel with the pins and slide into position! Ends of pins are slotted for a large screwdriver. Fits 1926-27 Model T's with wire wheels 1928-31 Model A's, as well as Early V-8's.
Part #
A-1012-W
|
Model Year
28-31
A tapered stainless washer to make worn wheels fit better. We only recommend using these if the tapered area of your wheel where the lug nut seats is badly worn. No washer will prevent paint from chipping. Paint in your wheel must be sanded or filed out to keep from chipping. U.S.A.