Part #
A-17583-AR
|
Model Year
28-28
On-off lever used on the OD-01 Owen-Dyneto electric wiper motor that was used in 1928 on Roadsters and Phaetons. U.S.A.
Part #
A-17502
|
Model Year
31-31
Special nut used to hold the vacuum windshield wiper in place on the slant windshield Model A's.
Part #
A-17616-A
|
Model Year
28-30
Holds the windshield wiper motor wire to the header. 3 required. U.S.A.
Part #
A-14589-NOR
|
Model Year
28-30
Used on 1928-early 1930 Coupe, Tudor, and Sedan Delivery. There is a notch at the top of the passenger side windshield garnish where this rests. It prevents the wiper wire from rubbing on the garnish molding. U.S.A.
Part #
A-17659
|
Model Year
28-30
This is a clip that holds the electric wire on the open car windshield frame. For open cars only. You'll need 2 per car. U.S.A.
Part #
A-17500-WK
|
Model Year
28-30
The correct black and blue cloth covered wire to run from the terminal box to the wiper motor. Has the special flag connector on end that connects to the terminal box. U.S.A.
Part #
A-14591
Model Year
28-29
Part #
A-14591-GR
Model Year
28-29
This unique clip was held in place by a bolt that held the gas tank to the cowl. It served as a grommet holder for the wiper and or dome lamp wire, and the other part of the clip held the top of the kick panel in place. Grommet included. 2 Required. U.S.A. 1928-29