Part #
A-17508-SS
|
Model Year
This stainless 12-volt wiper motor comes with the arm and the blade. It does not have a built in switch to operate lt. If used on a Model A closed car, you will not be able to swing windshield open.
Part #
A-17500-E6
|
Model Year
09-31
It is best to find original wiper motors and use this as a last resort. This is a universal 6 volt wiper motor with a built in switch. The shaft of the motor is threaded to hold the motor in place. If you use this on a closed car, you will not be able to swing the windshield open.
Part #
A-17530-B
Model Year
29-31
Part #
A-17530-D
Model Year
30-31
Part #
A-17530-F
Model Year
31-31
Part #
A-17530-G
Model Year
31-32
Part #
A-17530-E
Model Year
31-33
For the purist, these authentic style arms are very well detailed right down to the embossing on the mounting clip. U.S.A.
Part #
A-17530-H
|
Model Year
30-31
8-1/4" vacuum wiper arm used on 160-B Town Sedan, 160-C Deluxe 4-door, and Victoria. Stainless steel covered with Trico logo. Arm L5B in the latest Judging Standards. U.S.A.
Part #
A-17564-A
|
Model Year
28-28
Nickel plated blade arm support used on the 1928 closed cars. This style was pinned to the wiper shaft. Use a standard roll pin for mounting (not included). Used with A-17565-AR wiper arm. See arms in catalog for mounting hole specifications.
Part #
A-17563-A
|
Model Year
28-28
Black painted style used on the 1928 open cars. Clamps to wiper shaft with included screw. Only used with the early style wiper arm, part number A-17565-AR. See arm for mounting dimensions.
Part #
A-17563-B
|
Model Year
29-29
Used on the 1929-30 electric wipers. Nickel plated, clamps to wiper shaft with supplied screw. Used with later style arm part number A-17565. See wiper arms for mounting sizes.
Part #
A-17513
|
Model Year
30-31
A chrome knob to replace a worn or missing knob on the vacuum wiper motors. U.S.A.
Part #
A-17541
|
Model Year
28-31
A brass double female connector that attaches to firewall for the inside and outside vacuum lines to connect. U.S.A.