Part #
A-8270
|
Model Year
28-34
160 degree thermostat that we have welded to a stainless steel piece of pipe. Slips into the upper radiator hose between the outlet and radiator. Pipe keeps thermostat from moving. Something Henry forgot! U.S.A.
Part #
A-8270-180
|
Model Year
28-31
180 degree thermostat that we have welded to a stainless steel piece of pipe. Slips into the upper radiator hose between the outlet and radiator. Pipe keeps thermostat from moving. Something Henry forgot! U.S.A.
Part #
B-8511-SS
|
Model Year
32-32
Stainless steel water pump shaft with the impeller pressed on. Shaft is the length for the 1932 pump which is 8-3/4" long. Shaft is made from 17-4PH stainless steel. A very hard and durable material that is magnetic, so don't be alarmed when your magnet sticks to the shaft. U.S.A.
Part #
B-8507
|
Model Year
32-34
Used on the 1932-34 4-cyl. water pumps. U.S.A.
Part #
B-8501-I
|
Model Year
32-34
Water pump impeller that was used on the 1932-34 4-cylinder motors. U.S.A.
Part #
A-8540-A
|
Model Year
28-31
The cup shaped washer that is on both sides of the front roller bearing on the pump. The felt (A-8542) rests in this cup. U.S.A.
Part #
A-8554
|
Model Year
28-31
The flat washer that goes up against the roller bearing in the front of the A pump. This keeps the felt out of the roller bearing. U.S.A.
Part #
A-8535
|
Model Year
28-31
This sleeve is pressed into the nose of the water pump casting, and the roller bearing rides in this sleeve. U.S.A.
Part #
A-8501-FIT
|
Model Year
28-31
This special brass fitting with a screw on cap was used to grease the rear bushing assembly of the pump. The front used a regular grease fitting. U.S.A.