Part #
A-52276
Model Year
30-31
Part #
A-52277
Model Year
28-29
Steel braces that run from the rear bow down to the belt rail. U.S.A.
Part #
A-47301-45B
|
Model Year
30-31
Steel gutters that fit the 1930-31 Coupe. Supplied in straight length, you will have to put the bend in them. This can be done by C-Clamping the end to a wheel or wooden jig with the correct radius. They can be bent hot or cold preferably hot. They were originally welded to the body. U.S.A.
Part #
A-47301-S
|
Model Year
28-31
The bottom piece nails down and holds the top material in place, and the top snaps over the lower piece to hide the nails. 6' long piece that can be used on front or rear. Correct dome on upper piece! Used on: 28-9 Coupe, 28-9 Spec. Coupe, 28-31 Tudor, 30-1 Pickup, 28-9 Taxi, and 30-1 Deluxe Delivery.
Part #
A-47778
Model Year
30-31
Part #
A-47779
Model Year
30-31
Used on 30-31 Coupe. This metal bracket goes just ahead of the rear edge of the door jam. Part of the bracket attaches to the heavy piece of wood over the door and the other end bolts to the roof rib rail. U.S.A.
Part #
A-47789
|
Model Year
28-31
This is just the metal housing only, it does not include the bracket that attaches it (A-47790 or A-47791) to the body or the filler material (AWD-1027-7). It mounts in the rear upper corner of the Tudor Sedan body and is what the corner of the headliner is tacked into. The metal housing is the same, right or left. Priced individually, 2 are needed if you're missing them on both sides. USA
Part #
AWD-1027-6
|
Model Year
28-31
These boomerang shaped pieces of wood go in the rear corners of the Tudor Sedan bodies where the rear top molding wraps down to the rain gutter. They are included in top wood kits. U.S.A.
Part #
A-47300
|
Model Year
28-31
Sold by the foot. U.S.A. This is the long grain cobra top decking. 5 Window Coupes take 5' and the Sedans take 7'. U.S.A. Note the number in the white box beside the word Quantity is where you will enter the number of feet that you want to order. 65" wide. USA
Part #
A-37807
|
Model Year
29-30
Special pin that acts as a hinge pin where the rear and center bows pivot at the belt rail. Fits 68A and 68B Cabriolets. U.S.A.
Part #
A-43503
|
Model Year
31-31
Used on 68-A,B,C Cabriolet and A-400's. Locks the top irons in place. U.S.A.