Part #
A-37319
|
Model Year
29-30
Skinny piece of rubber that fits under the dress plate of the upper folding post on Cabriolets. U.S.A.
Part #
A-47303-C
|
Model Year
28-29
Used on the front of the drip rail molding on the 28-9 Briggs Fordor only. SS nail included.
Part #
A-47303-D
|
Model Year
28-31
These tips were used on the left right front roof drip rail molding. Used on 1928-29 Coupes, and Tudors. SS nail included.
Part #
A-53550/51
|
Model Year
28-29
Used on the front of the drip rails on 1928-29 Sport Coupe, and Business Coupe. Nickel plated.
Part #
A-174-DS
|
Model Year
28-29
Used on Coupes Tudor Sedans. This panel slips over the face of the wood header above the windshield. The finish on the steel one normally needs some finishing touches because it is hand made.
Part #
A-47772-L
Model Year
30-31
Part #
A-47772-R
Model Year
30-31
Runs across the top of the door opening. The wooden side rails set in this metal. The front edge has a piece of metal bent downward to attach to the door hinge post. Coupe and Sport Coupe only. U.S.A.
Part #
A-47771-A
|
Model Year
28-29
Used on the 1928-29 Coupe/Tudor. Attaches the header to the rib rail. The rib rail is the piece of wood that runs front to back and holds the roof ribs that run side to side in place. Sold in pairs only.
Part #
AWD-1027-7
|
Model Year
28-31
This is the tack strip only that you will have to install in your metal retainer. Goes in the rear upper corners of the 1928-31 Tudor Sedan interior. This is what your tacks go into to hold the rear corner of the headliner in place. The metal piece that this slides into is not being reproduced. Hardware included. U.S.A.
Part #
A-47303-A
|
Model Year
Used to finish off the hide'm welt. (A-47304) Nickel finish. comes with a stainless steel nail. U.S.A.