Show 9 Of 88
Showing 9 Of 88 results
Part # RA-1015 Model Year 09-31
Part # RA-1016 Model Year 09-31
Part # RA-1023 Model Year 09-31
Part # RA-1025 Model Year 09-31
This tool is used for setting solid rivets and giving them a round peened appearance. Fits standard air hammers. U.S.A.
Part # A-2041-T | Model Year 28-31
This tool is made special to slip over the square end of the adjusting wedge A-2041. And used to adjust the brake. Cad plated finish. U.S.A.
Part # A-2018 | Model Year 09-31
This little anvil clamps in a vise and makes riveting or removing old linings a snap! Kit comes with a punch to knock out old rivets, a tool to swedge new tubular rivets, and a tool to drill and countersink linings.
Part # T-2714-T | Model Year 09-27
This driver is used for installing and removing the T-2714 bushing. Prevents damage to spindle arm. Also used to install the A-2227 bushings in the brake camshaft housing and in the brake toggle lever housing. It is NOT used to drive out old bushings. U.S.A.
Part # A-2227-R | Model Year 28-31
This bushing is used to ream the A-2227 bushings after they have been installed, for a perfect fit. This is a quality American made spiral cut hand reamer. Not a cheap import! U.S.A.
Part # A-6259-M | Model Year 28-34
A modern style nut that holds the cam gear onto the end of the camshaft. This style has a 1-1/2" hex machined onto it so that special tools aren't necessary.
Part # A-6251 | Model Year 28-31
Special tool for removing and installing the A-6259 cam nut. U.S.A.
Part # A-9599 | Model Year 28-31
No more guessing with this little gadget. Attaches to the Zenith carb to set the float level right where it is supposed to be. Comes with instructions. U.S.A.