Part #
A-3581-BS
|
Model Year
30-31
A complete set of gaskets for the 2 tooth steering gear box. U.S.A.
Part #
A-3568-T
|
Model Year
29-31
For the 2-tooth steering gear assemblies. This tube replaces the end plate on the steering column and has a tube that goes up above the oil level to prevent oil leaking. The tube is welded to the end plate. U.S.A.
Part #
A-3524-43G
Model Year
29-30
Part #
A-3524-44G
Model Year
30-31
Long shaft that your steering wheel and steering worm gear attach to. Made for the Gemmer steering boxes only.
Measure your old shaft to be sure you are ordering the correct shaft. Pressing the steering worm requires a hydraulic press and special tooling made so the shaft won't bend during the pressing process. Best to buy the new shaft with the worm installed if you don't have the capabilities. U.S.A.
Part #
A-3524-43GW
Model Year
30-30
Part #
A-3524-44GW
Model Year
30-31
For the Gemmer steering boxes only. This is a new shaft with a new worm gear installed. For the two tooth box only. Measure your old shaft to be sure. Shaft is U.S.A., worm is import.
Part #
A-3610
|
Model Year
28-41
A thin nut for holding on the steering wheel. 5/8-18 thread. U.S.A.
Part #
A-3553-D
|
Model Year
29-31
For the steering worm bearing on the later 2-tooth boxes. Heavy metal piece that the adjusting bolt presses against and has the bearing race machined into the bottom. U.S.A
Part #
A-3554
|
Model Year
29-31
Bolt and thin nut that adjusts the upper race in 2-tooth steering boxes. U.S.A.