Part #
A-3547-MB
|
Model Year
28-31
This kit bolts the steering box to the frame rail. Correct thick headed bolts with no head markings. U.S.A.
Part #
A-3549-N
|
Model Year
29-31
Set of 4 of the special nuts used to hold the sector housing on the steering box. U.S.A.
Part #
A-3538
|
Model Year
28-31
The oil fill box on the top of the steering box for the 2 tooth box. 1/4" NPT thread. U.S.A
Part #
A-3538-A
|
Model Year
28-30
The oil fill box on the top of the steering box for the 7 tooth box. 1/8" NPT thread. U.S.A.
Part #
A-3521
|
Model Year
28-31
A rubber strip that goes around the steering column, held in place with the column clamp. U.S.A.
Part #
A-3507
|
Model Year
29-31
Used only on the 2-tooth boxes. Clamps the steering shaft housing in place just above the steering box. Mounting bolt included.
Part #
A-3519
|
Model Year
28-31
Holds the steering column on the inside of the car.
Part #
A-3519-BT
|
Model Year
28-31
The special screws/washers for holding the column clamp in place.
Part #
A-3519-BTL
|
Model Year
30-31
Long bolts used to attach the steering column clamp when steering column drop spacer was used. Used on the 1930-31 Deluxe Phaeton.