Part #
A-11102
|
Model Year
28-31
This is the bronze button that you see from the outside of the starter. The starter switch makes contact with this button. U.S.A.
Part #
A-11350-USA
|
Model Year
28-31
Original style starter drive. Will only work with starters that have the 5/8" shaft. Early 1928 starters had a 1/2" shaft. This is an American made starter drive!
Part #
A-11375
|
Model Year
28-31
Always good to have a spare under the seat! These have the larger size eyes in the end for the 3/8" mounting bolts. Will work in place of the spring that had the eyes for the 5/16" bolts since no one is making that particular one.
Part #
A-11382-SE
Model Year
28-31
Part #
A-11382-S
Model Year
28-31
Special thin headed bolts and special washers to hold the drive spring in place and to hold the drive on the shaft.
Ford used 5/16" on some and 3/8" on others. A-11382-SE and A-11382-S are complete kits. T-5025 and A-11383 are washers only. U.S.A.
Part #
A-11351
|
Model Year
28-31
Key used for mounting the starter drive to the starter shaft. U.S.A.
Part #
A-11383
|
Model Year
28-31
Special lock washer for starter drives that used 3/8" bolts. This is the most common size and is what all of the reproduction drives use. Its good to have spares of these on hand. 2 required per drive. USA
Part #
T-5025
|
Model Year
09-27
Special locking washers that lock drive spring bolts in place on starter drive. It's good to have spares of these. 5/16 was used on all Model T's and early Model A starter drives. U.S.A.
Part #
A-11357
|
Model Year
29-31
Starter drive sleeve that only fits the later starter drives with the 3/8-24 bolts and attaches to the 5/8 starter shaft. Sleeve has 2 slots milled on each side so you simply slide it onto your old starter drive and tap the strip of metal down into the groove for attaching. These are N.O.S. USA
Part #
A-11384
|
Model Year
28-31
Originally offered by Ford to support the drive spring and help keep the bolts from bending. These only work on drives with 5/16" bolts. U.S.A.