Starter

|
Show 9 Of 54
Showing 9 Of 54 results
Part # A-11002-ST12 | Model Year 28-31

Rebuilt starters sold on exchange only. Completely rebuilt, new fields and rebuilt armature are part of every rebuild! 5/8" shaft. You must have a complete rebuild-able core. Remove starter switch, starter drive, drive key and band before sending core. These will not be returned if left on core. U.S.A.

This starter has a threaded stud on it rather than a contact button. For applications when you don't want to run the original style starter switch but a solenoid instead. Solenoids are listed in the Model T section of the catalog under STARTER.

12-VOLT

DISCONTINUED
Temporarily
OUT OF STOCK
$225.00 EXC
Part # A-11002-ST6 | Model Year 28-31

Rebuilt starters sold on exchange only. Completely rebuilt, new fields and rebuilt armature are part of every rebuild! 5/8" shaft. You must have a complete rebuild-able core. Remove starter switch, starter drive, drive key and band before sending core. These will not be returned if left on core. U.S.A.

This starter has a threaded stud on it rather than a contact button. For applications when you don't want to run the original style starter switch but a solenoid instead. Solenoids are listed in the Model T section of the catalog under STARTER.

6-VOLT

DISCONTINUED
Temporarily
OUT OF STOCK
$215.00 EXC
Part # A-11480-COR | Model Year 30-30
Authentic style starter rod grommet that was used from June through November of 1930. Our A-11480-C will do the same job but for National Judginging, this one has the authentic shape. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$8.75 EA
Part # A-11062 | Model Year 28-31
U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$0.85 EA
Part # A-11073 | Model Year 28-31
U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$0.30 EA
Part # A-11052-B | Model Year 28-48
This bushing is used in the end plate of the starter opposite the drive end. (brush end). Won't work on plates with removable end caps over shaft end hole. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$2.00 EA
Part # A-11135-A Model Year 28-29
Part # A-11135-B Model Year 28-31
These bushings are used in the end of the starter plate towards the starter drive end. (oposite of brush end) Two different diameter bushings were used, .688" and .753". U.S.A.
Part # A-11087 | Model Year 28-31
Wraps around the starter housing inside to prevent shorts at the end of the fields. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$2.50 EA
Part # A-11107 | Model Year 28-31
Ours is fiber that won't melt like the cut pieces of plastic tubing sold elsewhere. U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.25 EA