Springs Leaf Front & Rear

|
Show 9 Of 34
34 Results
Part # A-5465-RE Model Year 28-31
Part # A-5715-RE Model Year 28-31
Part # WEB-KIT-0659 | Model Year 28-31
The only US made shackle on the market today! This is an accessory style shackle kit that uses hardened bolts that are pressed into a heavy steel end plate. Kit uses steel bushings as original and comes with modern grease fittings installed. Bushings will need to be drilled/reamed once installed into the leaf spring and perches. 1928-31
DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-5345-F Model Year 28-48
Part # A-5345-R Model Year 28-32
Part # WEB-KIT-1796 | Model Year 28-31
Square headed center spring bolts with nuts. 1928-31 U.S.A.
DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-5461-B | Model Year 30-31
From February 1930 until the end of production, this style crank guide was used with the rounded top style U-bolts.
DISCONTINUED
Temporarily
OUT OF STOCK
$11.75 EA
Part # A-5455-A Model Year 28-30
Part # A-5461-A Model Year 28-28
Part # WEB-KIT-0660 | Model Year 28-30
Used from the start of production until February of 1930. The square top style U-bolts.
DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-5301-DLX | Model Year 28-31
DISCONTINUED!
DISCONTINUED
Temporarily
OUT OF STOCK
$133.00 EA
Part # A-5310-AX | Model Year 28-31

Expect in 1 week.

These repo springs are made using SAE 5160 raw steel flats that are specially blended during the steel forging process to exacting SAE guidelines. These guidelines are repeatedly used to produce raw material specifically designed for leaf spring applications. The raw material is then hand formed under exacting quality guidelines during the spring manufacturing process. During the final assembly process, each individual leaf of the spring is hand fitted to ensure a fully functional and a esthetically pleasing leaf spring. Edges of the top leaf are tapered so they fit properly in the cross member. Spring includes the center spring bolt and bronze shackle bushings. U.S.A.

Original style front leaf spring.

DISCONTINUED
Temporarily
OUT OF STOCK
$262.00 EA
Part # A-5310-A Model Year 28-31
Part # A-5310-RE Model Year 28-31
Part # A-5310-AX Model Year 28-31
Part # WEB-KIT-0655 | Model Year 28-31

These repo springs are made using SAE 5160 raw steel flats that are specially blended during the steel forging process to exacting SAE guidelines. These guidelines are repeatedly used to produce raw material specifically designed for leaf spring applications. The raw material is then hand formed under exacting quality guidelines during the spring manufacturing process. During the final assembly process, each individual leaf of the spring is hand fitted to ensure a fully functional and a esthetically pleasing leaf spring. Edges of the top leaf are tapered so they fit properly in the cross member. Spring includes the center spring bolt and bronze shackle bushings. Available as original or with reversed eyes for speedsters to drop the front end about 1".   USA

DISCONTINUED
Temporarily
OUT OF STOCK
Part # A-5311 | Model Year 28-31
A panhard bar ties your frame and axle together to eliminate body roll and firm up the relation between the body and chassis. Installs in about a half an hour with no drilling necessary. Cannot be used with the modern shock kit. U.S.A
DISCONTINUED
Temporarily
OUT OF STOCK
$117.95 EA
Part # A-5330-MB | Model Year 28-31
Two hex headed bolts with square nuts to bolt the front spring clip.
DISCONTINUED
Temporarily
OUT OF STOCK
$1.00 SET