Part #
A-47903-S
|
Model Year
28-31
The pivot brackets and the seat cups for the Tudor Sedan seat assembly. One kit does one bucket seat. U.S.A.
Part #
A-70144
|
Model Year
30-31
This bolts to the seat wood and is about 12" long with a hole in it for the seat hinge rod A-70145 to pass through. For Victoria, Dlx. Phaeton. U.S.A.
Part #
A-70145
|
Model Year
30-31
5/16" threaded rod goes through the floor bracket and hinge channel. It is removed to change seat adjustment on early Victoria Deluxe Phaeton. U.S.A.
Part #
A-47902-EXT
|
Model Year
28-31
Supports the front edge of the Tudor Sedan front seats. They have a 2" offset in them to give you more legroom. U.S.A.
Part #
A-47907
|
Model Year
28-31
Used on various different body styles, this peg locates the seat cushion. Normally 2 were used per cushion. U.S.A.
Part #
A-70143
|
Model Year
30-31
This L shaped brace is for the early Victorias. The seat hinge goes through this 3 hole bracket to adjust the early adjustable seats. Both the drivers and passenger side used them. 4 required. U.S.A.
Part #
A-70123-RE
|
Model Year
30-31
Brackets go under the front seat wood to reinforce the mounting of the legs that support the backrest. Used on Deluxe Phaeton, and Leatherback Victoria. 1930-31. U.S.A.
Sold in pairs only.
Part #
A-47903
Model Year
28-31
Part #
A-47903-T
Model Year
28-31
The cups only for the rear of the front bucket seat assembly. We make them in two different sizes so you can adjust the position of your seat.
The original mounting bolt for these were a slotted oval head machine screw which unfortunately isn't available today.
Best you can do is use a flat head machine screw from your local hardware store. U.S.A.
Part #
A-70126-C
|
Model Year
31-31
This little bracket was screwed on the back edge (bottom) of the Victoria and Deluxe Tudor Sedan front seat assemblies. It was a place for the carriage return spring to pull. (sawtooth style) U.S.A.