Seat Parts

The saw-toothed style seat adjuster with the bracket that mounts to the front of the seat unit. Does not come with bracket that mounts to floor. Used on Dlx 2-Dr Sedans, Dlx Coupes, Vicky, A400, Cabriolets, Slant Windshield 4-dr. and Dlx Phaeton.

The special threaded bolt that adjusts the screw type adjustable seat. The seat adjusting knob fits on the end of this. Used on 1930-31 cars. U.S.A.

Used with the A-63534-AR seat adjuster bolt. It is the rear bracket under the seat frame that the long rod sets in that adjusts the seat. It attaches to the bottom of the wood seat frame bracket. U.S.A.

This style was used on 1929-31 Murray 4-doors to adjust the front seat. Used on 155-A/C, and 165-A/C. 19-1/16" long. U.S.A.

This bracket bolts to the front underside of the seat carriage wood AWD-1510. The front edge hangs down and is what the head of the seat adjuster bolt is held in place with. Used on several body styles with the screw type adjuster.

This bracket mounts to the floor under the seat for the saw-tooth style seat adjuster to latch onto. Used on Dlx Tudor Sedan, Late Dlx Coupe, Victoria, A400, Cabriolet, and Slant Windshield 4-drs. U.S.A.

This bracket bolts to the sill in front of the seat riser with the vertical portion (part with A-47832-N captivated in) coming up on the back side of the seat risers front edge. This bracket stays stationary while the seat track moves. For the screw type seat adjuster. U.S.A.

Used on the A400's and Victoria's with adjustable driver's seat. Runs front to back under the driver's side seat to protect the seat adjuster and spring. Nails to the bottom of the seat wood.

This knob is for the adjustment on the front seat. It fits the 1929-31 4-Doors, and the early 1930-31 Coupes. Chrome plated.