Seat Parts

This screw holds the round style seat adjust knob onto the seat adjuster bolt. U.S.A.

Armrest support brackets for the 1930-31 Deluxe Phaeton. Brackets will work on driver or passenger side. Sold in pairs, you'll need 1 pair per side. U.S.A.

The pivot brackets for the center style armrest used on the 4-door sedans. U.S.A.

Used on coupes and straight windshield 4-dr. sedans. These clips attach to the inside edge of the outer board that the seat tracks are attached to. These hit against the back side of the front of the seat riser to prevent the seat from going forward too far. U.S.A.

Supports the back edge of the bucket style seats that were used on Victoria, Deluxe Phaeton, and A400's. U.S.A.

This armrest was used on the sides of the back seat of 4-door Sedans, and Victorias. One kit does both sides.

This style of handle was used on the 1930-31 Victoria, and the Slant Windshield 4-drs. Chrome.

The saw-toothed style seat adjuster with the bracket that mounts to the front of the seat unit. Does not come with bracket that mounts to floor. Used on Dlx 2-Dr Sedans, Dlx Coupes, Vicky, A400, Cabriolets, Slant Windshield 4-dr. and Dlx Phaeton.