Part #
A-41564
|
Model Year
28-29
16" long strip of metal that attaches to the rumble rain gutter towards the front of the rumble opening. Supports the rumble trim panel and provides a place for the mounting screw to attach. Used on 1928-29 Coupe/roadster with rumble seats. U.S.A."
Part #
A-41543-S
|
Model Year
28-31
Hinges, Braces and all necessary hardware for mounting rumble lid to body. U.S.A.
Part #
A-41485-CS
|
Model Year
28-31
This kit fits both the 1928-29's as well as the 1930-31's. Comes with all you see. The upper bracket is aluminum, and the lower (long/skinny) bracket is stamped steel. You will have to drill the holes. U.S.A.
Part #
A-41600
|
Model Year
28-32
When changing over to a rumble, you'll use this style striker plate for the rumble lock. U.S.A.
Part #
A-702352-A
|
Model Year
28-31
The locking rumble handle for any of the Coupes or Roadsters. Chrome plated. Ford originally had different lengths of the shafts on these handles for different applications. This one is the longest version. Simply cut the extra shank off if you need the shorter version.
Part #
A-702352-B
|
Model Year
28-31
Originally, this handle was used on the Cabriolets. It will also fit the Coupes and Roadsters. Chrome. The threaded shank on this handle is the longest version Ford made. If your car requires the shorter version of the shank, you'll need to cut the threaded shank down.
Part #
A-1059-A
Model Year
28-29
Part #
A-1059-AT
Model Year
28-29
Part #
A-1059-B
Model Year
30-31
Part #
A-1059-BT
Model Year
30-31
Part #
A-1059-ABS
Model Year
28-31
Steel deck/rumble lids. These are the inner and outer structures. Rumble lids have the D-nuts installed to accept the A-41543-S reproduction rumble hinges as well as the D-nuts for the clips to hold the seat spring to the lid.
The holes are already in place for the handle and latch. Trunk lids have the D-nuts installed for the A-41530 deck lid support and holes in place for the latch and handle. If your inner structure is still in good shape, we have a steel skin only! A-1059-ABS. U.S.A.
Part #
A-41572
|
Model Year
30-31
Cast iron bracket that bolts to the bumper brackets for the rumble step plate to attach to.
Part #
A-41563-SP
Model Year
28-29
Part #
A-41563-RP
Model Year
30-31
Rubber pads with a nice bead around the outside edge. Installs between step plate and the fender. U.S.A.